Product Description
CMD CHIP ON DESK 4 Amp Twin Port USB Charger Secure C-Clamp Fixing Available In Three Colours
CMD CHIP ON DESK 4 Amp Twin Port USB Charger Secure C-Clamp Fixing Available In Three Colours
Height: 55mm (Above Desk)
Width: 80mm
FEATURES:
- 4 Amp USB Charger
- Dedicated 2 Amp per USB Socket
- Secure c-clamp fixing
- Available in three colours
- Thermal cut-out and short circuit protection to protect the user
- Independently tested to IEC 60950-1 – Information technology equipment
PRODUCT INFORMATION
Chip is the latest addition to our on desk range and designed with a modern working office in mind. Our first on desk module not to incorporate a traditional UK socket in favour of USB charging.
Incorporating a 4 Amp USB charger that allows both of the USB sockets to deliver a dedicated 2 Amps. This means that each socket is capable of charging all leading smartphones & tablets.
Supplied with a 1m mains cable to 3-pole GST connector allows for daisy chaining with an Elite+ under desk power module. Alternatively, a 3-pole GST starter cable can be used to plug Chip directly into a floor box/wall socket.
PRODUCT OPTIONS
Available in three colours as standard
Black (Black cables)
Grey (White cables)
White (White cables)
FIXING
A bespoke c-clamp fixing for desk thickness 15mm-35mm
SAFETY
Thermal cut-out and short circuit protection to protect the user when inferior cables and devices are used.
Complies with IEC 60950-1
Complies with BS 5733
Complies with BS EN 62684
NOTES
Cables: White and grey modules are supplied with white cables and black modules are supplied with black cables.
Data Cables: CMD cannot accept any responsibility or liability for providing category 6 performance in products supplied. CMD cannot accept any responsibility or liability for providing HDMI performance in products supplied over 5m in length.
Fuses: Only accessible after removal of equipment plug.
Lead Lengths: All lead lengths are approximate and subject to tolerance. Lead lengths shown will be the conductor length and not the distance from the end of the module to the plug. For example, a 3m prewired power lead will be approximately 2.875m as 125mm will be internal for the termination. This is also applicable for data leads.
Data fascias may be subject to colour change.